Lost River Honda

  • 217 N Front St
  • Arco, ID 83213
  • Call Us: (208) 527-8278
  • https://www.lostriverhonda.com/
Print This Page

2020 Portable Winch™ Winches Gas PCH2000

Information

2020 Portable Winch™ Winches Gas PCH2000

The Almighty

The PCH2000 is the most powerful winch available; performing the most demanding tasks smoothly.

Design

The PCH2000 has a capstan drum that allows to maintain a constant force, over an unlimited length of rope, at a speed of 20 metres per minute. It is also the first model to offer a 108-mm anodized drum. By oversizing the drum, the friction surface expands, and it results in better load control. Through anodic oxidation treatment, the PCH2000’s drum features better wear resistance and does not increase the rope’s conductivity. These attributes make it ideal for its assignment to tasks around and on electrical structures! Developed for lifting, the PCH series benefits from its own unique clutch and rope grabbing system. Once the rope is inserted into the grabbing system, the operator activates the clutch and initiates the movement by pulling the rope horizontally. At any time, the operator can decide to stop lifting and hold the load in mid-air. It is also possible to pull on the handle of the cord attached to the grabbing system to disengage it and lower the load, while controlling the main rope in the descent.

Performance

Powered by a 160 cc Honda GX series engine, the PCH2000 features an unprecedented pulling power of 1,150 kg and a lifting capacity of 450 kg in a single line. Of course, a block and tackle system will allow you to increase its capacity!

Photos

Highlights

  • Arco, Idaho
  • 2020
  • Portable Winch™
  • Winches Gas PCH2000
  • Model: GX160 cc
  • Available
  • 14-5/8''
  • 14-1/4''

Specifications

  • 2020
  • Portable Winch™
  • Winches Gas
  • PCH2000
  • General
  • Model: GX160 cc
  • Honda
  • 4
  • Continuous
  • Centrifugal
  • Aluminium alloy
  • Heat treated 3-stage helical spur gears / Shafts mounted on ball bearings / Oil bath lubrication.
  • 53:1
  • Unidirectional double bearing
  • Maximum Pulling Force With Standard Drum: 2530 lb
  • 108 mm drum : 66'/min
  • Minimum Diameter: 1/2" | Maximum Diameter: 1/2" | Ideal diameter: 1/2" | Capstan Drums Standard: 108 mm
  • 19''
  • 14-5/8''
  • 14-1/4''
  • Rated Lifting Capacity With Standard Drum: 990 lb
  • 76 lb
  • Anchor: Polyester sling 60 mm x 2 m (PCA-1260)
  • Private Use : 2 years | Commercial Use : 1 year | Engine/Motor: Honda International Warranty